IP camera has no video
Check power and link first, then open the camera directly before testing its video stream.
SteedVision / Field tools
CCTV testers and field guides for installers.
Find the cause of a camera fault, then choose the tester with the documented checks your job requires.
Already know what you need? Browse all testers ↗Start here / Field troubleshooting
What's stopping your installation right now?
Choose the symptom you see on site. These guides help you check the cause; this website is not connected to your camera.
PoE is not powering the camera
Check the camera power requirement against the source, then isolate the cable and PoE port.
Camera cannot be discovered
Confirm power, link and IP reachability before treating ONVIF discovery as a camera fault.
Discovered, but video will not preview
Discovery only finds the device; check credentials and an actual stream profile separately.
Analog camera has no video
Confirm camera power, coax connection and the actual AHD, TVI, CVI or CVBS output format.
Connection drops intermittently
Compare link and power events with a short known-good cable before changing stream settings.
Choose your tester
Match a tester to your workflow.
21 available tester models
Choose in any order. Only confirmed requirements count as a match.
Answer a question to narrow the list.
Product use & support
See the tool. Get the right help.
Browse product and interface photographs on each model page. Keep your model and version handy if you need a manual or firmware file.
1-Year Warranty
All tester models are covered for one year.
30-Day Returns
Unused, original packaging; request RMA before returning.
Secure Checkout
Pay by card or PayPal.
Model-Specific Support
Manual and firmware help by tester model and version.